Product Variants
Tile Cleaner
tc-1GRESBOND Tile Cleaner is a powerful, fast-acting, acid-based solution designed for the effective removal of dirt and stains from floor and wall tiles. Ideal for daily maintenance, Tile cleaner ensures your tiles remain spotless and gleaming
View Product
Marble Cleaner
marbleGresbond Marble Cleaner is a high-performance, non-acidic cleaner specially formulated for marble, natural stone, granite, and ceramic tile surfaces. Its gentle formulation ensures it does not stain or damage porous natural stones, preserving their natural finish and elegance. Designed for both routine maintenance and deep cleaning, it effectively removes stains, grease, limescale, and grime without harming grout or delicate surfaces. With its low-VOC composition and strong sanitizing properties, it keeps your premium flooring hygienic, spotless, and naturally beautiful.
View ProductFragrance-Cleaner
fragranceGRESBOND Fragrance Cleaner is a powerful, fast-acting, acid-based solution designed for the effective removal of dirt and stains from floor and wall tiles. Ideal for daily maintenance, Tile Cleaner ensures your tiles remain spotless and gleaming
Coming SoonMethod of Application
A comprehensive, sequential procedural view designed for engineers and site applicators to attain faultless surface integration using Marble Cleaner adhesive compounds.
Surface Preparation
Remove all Dust, Water, Oil & Sealers from Surface / Substrate to ensure full chemical contact.
Water Addition
Add 5 to 6 Liters of clean water or Admix into an empty structural mixing bucket.
Adhesive Mixing
Add 20 Kg Marble Cleaner Thin Set Adhesive into water and mix thoroughly until it attains a perfect, uniform paste.
Slaking Period
Allow the mixed material to slake (rest) for 5 to 10 minutes to fully activate its polymer bonding properties.
Re-mixing
Mix the material again briefly without adding extra water, then transfer the material onto your notch trowel.
Flat Bedding
Use the flat side of the trowel to spread and press the adhesive layer uniformly onto the base substrate.
Adhesive Combing
Comb through the adhesive layer at a precise angle with the help of a correctly sized Notch Trowel.
Back Buttering
Spread the adhesive material on the backside of the tile also if the tile dimension is larger than 12\"x12\"."
Leveling
Press and tap the tile surface gently with the help of a Wooden Hammer to maintain a perfectly uniform surface plane.
Surface Cleaning
Clean the tile surface thoroughly using a clean wet cloth or damp sponge before the compound sets.
Curing Phase
Restrict all foot traffic completely across the layout zone and wait up to 24 Hours for full chemical curing.
Final Grouting
After completing the 24 Hrs wait period safely, you can immediately proceed with filling joints via the grouting process.
Installation Instructions
HEALTH, SAFETY & ENVIRONMENT
- Causes eye irritation; avoid direct contact.
- Keep out of reach of children. Do not ingest.
- Use gloves and eye protection while handling.
- In case of skin contact: wash with plenty of water.
- In case of eye contact: rinse thoroughly with water & seek medical advice.
- Store away from children, sunlight, and heat sources.
- Dispose of container/contents as per local regulations.
HEALTH, SAFETY & ENVIRONMENT
- Causes eye irritation; avoid direct contact.
- Keep out of reach of children. Do not ingest.
- Use gloves and eye protection while handling.
- In case of skin contact: wash with plenty of water.
- In case of eye contact: rinse thoroughly with water & seek medical advice.
- Store away from children, sunlight, and heat sources.
- Dispose of container/contents as per local regulations.
STORAGE INFORMATION
- Store in a cool, dry, frost-free place.
- Temperature range: 5°C-35°C.
- Keep containers tightly sealed when not in use.
PACKAGING OPTIONS
- 500 ml
- 1 Litre
SHELF LIFE
- 24 months
Suitable Substrates
Ceramic Tiles
Vitrified Tiles
Glass Mosaic Tiles
Unglazed ceramic tiles
Porcelain tile
Note: Surfaces must be thoroughly cleaned and roughened before the installation of tiles or stones to secure dynamic mechanical integration.
